我们的创新型柔性相控阵探头可以使用户完成新的检测应用。 FlexoFORM扫查器 可以使用一种柔性阵列探头，对管道的弯头区域进行腐蚀检测。这种解决方案所使用的探头包含64个晶片，频率为7.5 MHz，晶片间距为1毫米，晶片高度为7毫米。探头被放置在水楔上，不仅...

我们用于手动接触式检测的A24探头系列拥有一个符合人体工程学要求的外壳设计，其薄膜可以更换，而且可以提供较大的正方形孔径，可用于多种不同的应用。厚度为0.5毫米的薄膜更便于耦合，使探头在粗糙的表面上顺滑地移动，而且可以防止探头受到磨损。 探头特性...

小底面探头可进入到活动空间狭窄的区域（A00探头的脚印尺寸为88毫米）。 Small-footprint probes offer access to confined areas (A00 probe has an 8 8 mm footprint) A special-design small-footprint wedge is available for those applications. Cable...

The universal probes are designed to have a low-profile probe/wedge combination for easier access in restricted areas. A wide selection of wedges is available to suit any angle beam application. These probes are used for manual or automate...

Near-wall probes offer a shortened dead zone at both ends of the probe (1.5 mm between center of first or last element and housing edge). They are well suited for composite channel inspections and are used for C-scan inspections of composit...

Deep penetration probes can be matched to a wide selection of wedges to suit any angle beam application. These probes are dedicated to deep penetration applications such as the inspection of thick plates and welds, forging, and noisy or gra...

Immersion probes are designed to be used with a water wedge or in an immersion tank when the test part is partially or wholly immersed. They are longitudinal wave probes that can be set up for refracted shear-wave inspections using a Rexoli...

Curved array probes are made with a corrosion-resistant stainless steel case and are guaranteed waterproof up to 1 m underwater. The acoustic impedance of these probes matches water. They are compatible with adjustable immersion wedges and...

Immersion corner wedges for curved array probes are available in specific radius and angle and also with adjustable radius to fit on various components to be inspected. These wedges are designed to perform manual scans and to accommodate th...

Integrated wedge and code compliant probes combine the probe and the wedge in the same housing, offering the lowest-profile probe-and-wedge combination for contact angle beam inspection. Coupling is always good between probe and wedge inter...

Advantages Available in standard refracted angles of 0, 45, 55, and 60 in steel for angle-beam inspections from 30 to 70, SW or LW Stainless steel screw receptacles provide a firm anchoring of probes to wedges. Lateral electronic scanning r...

Special Applications Transducers include combination longitudinal/shear mode transducers, polymer (PVDF) immersion transducers, captive water column transducers and many more. They provide solutions for a variety of applications in flaw det...